Engineer Training

Any question, rule number, or answer reported as wrong will get looked at manually in a couple of days. Please write what is wrong with this flash card and what it should be which will speed up the correction process.
-Thank you!

Front #254

ABTH 10.3

If one end of the limits of Track and Time is designated by a "Switch Yes," where does the authority end?

The front of the signal before the switch
The clearance point before the switch of the track for which the authority has been granted
The back of the signal on the other side of the switch
The switch points

Back #254

Flag

ABTH 10.3

Answer: The back of the signal on the other side of the switch

Feedback:
- Limits designated by a switch extend only to the signal governing movement over the switch unless otherwise designated. - Track and Time does not have to use switches for limits but when it does, the signals become the reference points. - Switch Yes, you can be in the OS or on the switch; Switch No, the limits end at the signal before the switch; therefore, you cannot be on the switch or in the OS