Engineer Training

Any question, rule number, or answer reported as wrong will get looked at manually in a couple of days. Please write what is wrong with this flash card and what it should be which will speed up the correction process.
-Thank you!

Front #103

ABTH 101.13A

Prior to making the initial movement of a locomotive consist outside designated Mechanical Department limits, what steps must be taken? (Select all the apply.)

Ensure the air compressor is cut into the locomotives
Position cutout cocks and valves for multiple-unit operation
Verify that hand brakes are released on all locomotives
Ensure locomotive air brakes are applied on each locomotive

Back #103

Flag

ABTH 101.13A

Answer: - Ensure locomotive air brakes are applied on each locomotive - Verify that hand brakes are released on all locomotives - Position cutout cocks and valves for multiple-unit operation

Feedback:
Before making an initial movement of a locomotive consist outside designated Mechanical Department limits, follow the steps below: 1. Ensure locomotive brakes are applied. 2. Check main reservoir pressure. 3. Verify all hand brakes are released. 4. Ensure all MU hoses are coupled. 5. Ensure cutout cocks are cut in. Following these steps ensures the equipment is set up correctly for the operation of the locomotive brakes.